− 3 −
III. SPECIFICATIONS
1. MECHANICAL SPECIFICATIONS
1 Sewing machine
LH-896N model of 2-needle, lockstitch machine with a center knife
2 Sewing speed
3,000 sti/min (max.)
3 Stitch length
Lockstitch : 2.0 to 3.4 mm (standard : 2.5 mm)
Condensation stitch : 0.5 to 1.5 mm (standard : 1.0 mm)
Back tack stitch : 0.5 to 3.0 mm (standard : 2.0 mm)
Condensation/Back tack stitch selectable
4
Types of welt
Parallel double welt, parallel single welt
slant double welt, slant single welt
Each with flap or without flap
5
Pocket lip length
(Welt lenght)
Possible to set in increments of 0.1 mm within the range of 18 mm (min.) to 220 mm (max.)
* Parallel flap : Min. 47.5 mm
* Slant flap : Dependent on deflection amount
(Reference) 20 mm gauge, deflection amount 20 mm, back-tuck 7.5 mm
/ Min. 67.5 mm
6 Welting width
(Needle gauge)
8, 10, 12, 14, 16, 18and 20 mm
* However, for
with dart stretcher, 8, 10, and 12 mm
For
with breast pocket, 8, 10 and 12 mm
For
with zipper attachment, 16 mm, 18 mm, 20 mm
7 Needles
ORGAN DP X 17 #14 to #18 (standard #16)
8 Thread
Spun thread #60 (Recommended)
9 Hook
Full rotary, vertical-axis, self-lubrication hook
10 Thread take-up lever
Slide thread take-up lever
11 Needle bar stroke
33.3mm
12
Cloth feed mechanism
Driven by stepping motor
13 Control
By a micro-computer
14
Safety mechanism
Machine operation is automatically stopped if the cloth feed mechanism error detector,
the needle thread breakage detector or any of the various safety devices is actuated.
15 Lubricating oil
JUKI New Defrix Oil No. 1
16 Operating air pressure
0.5 MPa
17
Air consumption
Approx. 40 Nℓ/min
18
Dimensions of machine
Width : 1,095 mm (1,580 mm - when including the stacker)
Length : 1,500 mm
Height : 1,165 mm
(1,800 mm - when including the thread stand)
19 Weight
238.5kg
20
Noise
- Equivalent continuous emission sound pressure level (L
pA
) at the workstation :
A-weighted value of 80.0 dB; (Includes K
pA
= 2.5 dB); according to ISO 10821- C.6.3
-ISO 11204 GR2 at 3,000 sti/min for the sewing cycle, 4.8s ON.
(Pattern : No.1, Jump feed speed of clamp foot : Max speed)
2. ELECTRICAL SPECIFICATIONS
1
The number of independent sewing patterns that
can be stored in memory
99 (1 to 99)
2
The number of alternate sewing patterns that can be
stored in memory
20 (1 to 20)
3
The number of cycles that can be stored in memory 20 (1 to 20)
4
Input power :
Single phase : 220 to 240V 50/60 Hz
3-phase : 200 to 240V 50/60 Hz (Optional 380V)
Voltage fluctuation : 10% of the rated voltage
5
Power consumption
270VA