V:\Mark\AP-F6 Operation Manual.doc
3
JST
AP-F6 PNEUMATIC CRIMPING MACHINE
2. INSTALLING AND
TRANSPORTING THE MACHINE
2.1 Installation
The crimping machine should be
mounted on a flat, stable surface.
There should be a single phase power
supply, and a compressed air outlet
available.
The rubber feet should be screwed
into the holes provided in the base,
and adjusted to the desired angle to
allow the most comfort-able working
position. The lock-nuts must be
tightened after the desired position is
achieved to ensure that they do not
become loosened with use.
2.2 Transporting
The machine must only be lifted by
the base, by two persons.
The press weighs 40 kilos, and should
not be lifted by one person under any
circumstances, because serious back
injury could result.
There is a handle attached to the front
of the machine to aid lifting.
