V:\Mark\AP-F6 Operation Manual.doc
1
JST
AP-F6 PNEUMATIC CRIMPING MACHINE
1. SPECIFICATIONS
The crimping machine consists of the
crimping press and a die-set.
There are two basic types of die-set,
1.1 Crimping Machine Specifications
1.2 Crimping Dies
Various types of crimping dies are available.
Select according to the type and size of the
terminals to be crimped, by referring to the table
on page 2.
Dies assembly drawing for non-insulated
terminals.
One is designed for use with Pre-insulated
terminals, and one for use with non-
insulated terminals.
Model no: AP-F6
º External dimensions: 264 wide x 415 long x
385mm high (not including reel hanger).
º Weight: 40 Kg.
º Power supply: 220/240V AC single phase
50/60 Hz.
º Air pressure: 490 - 686 Kpa (5 - 7 Kg/Cm²)
º Air consumption: 490 Kpa Hr. 3NL/cycle
º Applicable terminals: Insulated and non-
insulated terminals 0.50 - 5.5 mm².
Dies assembly drawing for insulated terminals.
