JRC JMR-7210-6X, Инструкция по эксплуатации

Страница: 330 / 586

Appendix B Alert, Maintenance INFO and Permanent information B-26
Message Explanation Advice
Azimuth Thruster 6(not
plausible)
There is a range error of
the data.
Check the sensor condition.
Azimuth Thruster
6(unavailable)
The data cannot be
received.
Check the condition of the sensor and the
communication path.
Blizzard(Process Error)
The control circuit in the
radar antenna is
abnormal.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Blizzard(SYNC Signal
Lost)
ASIC for radar detected
an error in an interrupt
signal.
Restart the device.
Blizzard1 DSP1(Load
Failed)
DSP cannot be started.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Blizzard1 DSP2(Load
Failed)
DSP cannot be started.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Blizzard1 High TEMP
The temperature of
Blizzard is too high.
Turn off the power of the device and restart
after ten minutes.
If it cannot be recovered, turn off the device
and contact the distributor.
Blizzard1-DSP1(Comm
unication error)
There is an error in
communication with DSP.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Blizzard2 DSP1(Load
Failed)
DSP cannot be started.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.
Blizzard2 High TEMP
The temperature of
Blizzard is too high.
Turn off the power of the device and restart
after ten minutes.
If it cannot be recovered, turn off the device
and contact the distributor.
Blizzard2-DSP1(Comm
unication error)
There is an error in
communication with DSP.
Restart the power.
If it cannot be recovered after three times of
restart, turn off the device and contact the
distributor.