JRC JFE-680 -, Инструкция по эксплуатации, Страница: 67 / 86

6. Maintenance & Check 55
Executing Line Monitor
・
Make LINE MONITOR a yellow display, press or the [ENT] key, and the following menu is displayed.
LINE MONITOR
NAV/DEPTH
＞
ALR
＞
PRINTER
＞
・
Make the monitor item a yellow display, press or the [ENT] key, and the input/output data of the serial
port is displayed, and input data is displayed in the upper part of the screen, and output data is displayed
under the screen.
･
When the [CLR] key is pressed, it returns to the maintenance menu.
Displaying RX Monitor
・
Make RX MONITOR a yellow display, press or the [ENT] key, and a present situation of the receiver is
displayed.
LEVEL
：
Detection level of sea bottom (maximum value within the range from sea bottom detection
position to the lower side)
RANGE
：
Range of sea bottom tracking
GAIN
：
Gain setting value
･
When the [CLR] key is pressed, it returns to the maintenance menu.
Displaying System No.
・
Make SYSTEM No. a yellow display, press or the [ENT] key, and the program version is displayed.
＊＊／＊＊／＊＊＊＊ ：
Date
Ver.
＊＊．＊＊ ：
Version
･
When the [CLR] key is pressed, it returns to the maintenance menu.
NAV/DEPTH
：
Navigation data/Depth output
ALR
：
ALR Input/Output
PRINTER
：
Printer port