JRC Alphatron Marine AlphaDynaPos Скачать руководство пользователя | Manualshive

Страница: 22 / 86

background image

22 | Installation

1 Installation

1.1 Operator Stations

The AlphaDynaPos Dynamic Positioning system is a redundant (double) Dynamic Positioning system fulfilling the rules
of IMO DP2.

A DP Console consists of a redundant DP Controller, a redundant DP Workstation, a redundant DP Operator Panel and
a redundant DP Thruster I/O Controller.

•

The redundant DP Controllers are built-up around an extremely robust and highly powerful computer with solid
state disks. The DP Controller has interfaces to the DP Workstation, DP Operator Panel and the DP Thruster I/O
Controller. The DP Controller has up to 21 NMEA and RTCM104 interfaces for Heading, Position, Wind and Motion
Reference Unit sensors.

Note The DP Controller can be bulkhead mounted inside a yard supplied bridge console or can be mounted
in an optional DP Console.

•

The redundant DP Workstations are equipped with a high resolution TFT color screen, a Trackball for operation and
an optional Printer. The DP Workstation is used for DP data presentation in a graphical and user-friendly manner.

Note The DP Workstation can be bulkhead mounted inside a yard supplied bridge console or can be
mounted in an optional DP Console.

•

The redundant DP Operator Panels are equipped with a joystick with heading knob integrated in joystick and with
push buttons for choosing different operator modes and a tracker ball with numeric keyboard.

Note The DP Operator Panel can be bulkhead mounted inside a yard supplied bridge console, or can be
mounted in an optional DP Console.

•

The redundant DP Thruster I/O Controllers can accept any kind of thrusters as can be found in DP applications (e.g.
CPP propellers, rudders, azimuth thrusters, tunnel thrusters etc.).

Note The DP Thruster I/O Controller is mounted in the Thruster I/O Cabinet and provides interfaces to both
DP Controllers.

•

The redundant UPS's powers the AlphaDynaPos DP2 Dynamic Positioning system. A unique feature of the
AlphaDynaPos DP2 system is that it is entirely powered by 24VDC. The UPS has a 230VAC input and a 24VDC fail
safe output with a 30 minutes battery back-up.

1.1.1 Power Distribution Panels

Inside the cabinet are the switches to turn the DP system components on or off.

UPS 1 POWER DISTRIBUTION

UPS 2 POWER DISTRIBUTION

SHIP SUPPLY 24 Vdc

F1

DP-1 (Mounting plate, Panel PC,
joystick)

DP-2 (Mounting plate, Panel PC,
joystick)

JC-SYSTEM (Mounting plate,
Panel PC, joystick)

F2

THRUSTER CONTROLLER

THRUSTER CONTROLLER

F3

DGPS-1

DGPS-2

F4

GYRO-1

GYRO-2

F5

WIND-1

WIND-2

F6

MRU-1

MRU-2

F7

CYSCAN LASER SYSTEM

GYRO-3

F8

Table 2: Power Distribution

«
...
20
21
22
23
24
...
»

Содержание Alphatron Marine AlphaDynaPos























































































Отзывы:

Нет отзывов

Похожие инструкции для Alphatron Marine AlphaDynaPos

Ettan IPGphor 3

Бренд: GE Страницы: 64

Бренд: GE Страницы: 56

Бренд: GE Страницы: 132

Бренд: GE Страницы: 16

Бренд: GE Страницы: 474

Бренд: Raymarine Страницы: 70

Бренд: Harbor Freight Tools Страницы: 4

Бренд: Landoll Страницы: 52

Бренд: Gason Страницы: 110

Бренд: Gainsborough Страницы: 2

Бренд: K&K Страницы: 8

Бренд: Haaga Страницы: 31

Бренд: Hacker Страницы: 2

Бренд: J.P. SELECTA Страницы: 8

Бренд: Haemonetics Страницы: 134

Бренд: Hadeco Страницы: 72

Бренд: H&S Страницы: 42

Бренд: Uniden Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды