JRC Alphatron Marine AlphaDynaPos Скачать руководство пользователя

Страница: 46 / 86

46 | Operation

2.3.5.3 Heading Sensor

GYRO section (suitable for 3 different heading devices):

•

Comport Status / sample time.

•

Check box to use this reference device.

•

Display of raw values Heading / Rate of Turn (if available).

•

Display of output values Heading / Rate of Turn.

•

Parameters for device orientation.

•

Display of List / Trim / Heading (if available).

•

Parameter for manual rating per device (0~10).

•

Sensor weighing section.

•

Display of calculated rating.

•

Display of deviation from weighed over a longer period.

•

Display of error from weighed.

•

Weight bar graph (0~1).

•

Parameter for filter time (moving average filter, default set at 2sec.).

•

Parameters for adjusting factors for the weighing rating / deviation/error (0~10).

•

Display of weighed heading and rate of turn used by the DP controller.

2.3.5.4 Wind Sensor

WIND section (suitable for 3 different wind sensors):

•

Comport Status / sample time.

•

Check box to use this wind sensor.

•

Display of raw values relative direction and speed.

•

Display of output values:

•

Relative direction and speed.

•

Absolute direction and speed.

•

Parameter for manual rating per device (0~10).

•

Sensor weighing section.

•

Display of calculated rating.

•

Display of deviation from weighed over a longer period.

•

Display of error from weighed.

•

Weight bar graph (0~1).

•

Parameter for filter time (moving average filter, default set at 5sec.).

•

Parameters for adjusting factors for the weighing rating / deviation / error (0~10).

•

Display of weighed absolute and relative wind used by the DP controller.

Содержание Alphatron Marine AlphaDynaPos























































































Результаты поиска

Содержание Alphatron Marine AlphaDynaPos

Отзывы:

Похожие инструкции для Alphatron Marine AlphaDynaPos

Бренды по названию

Популярные бренды

JRC Alphatron Marine AlphaDynaPos, Руководство по эксплуатации

Результаты поиска

Содержание Alphatron Marine AlphaDynaPos

Отзывы:

Похожие инструкции для Alphatron Marine AlphaDynaPos

Бренды по названию

Популярные бренды