JR Racing XS3 PRO, Руководство пользователя

Страница: 31 / 40

30 31
Accessing the Direct Trim Mode
The Direct Mode function of the XS3 PRO is accessible
through the use of the electronic throttle or steering trim
levers, as well as the two electronic grip levers (A&B)
located on the upper portion of the grip handle. This
function allows for quick trim adjustment of these controls.
* Note : When Auxiliary Channel 3 function 2P is
selected, the two screens above are not present.
To access the Direct Trim Mode function, turn on the
transmitter power switch. Next, move the desired trim lever
to be adjusted. The appropriate screen for the selected
trim lever will be displayed. To adjust, simply move the
trim lever in the desired direction until the correct amount
of trim is achieved. Once the desired trim is achieved,
the screen will return to the Normal display screen after
approximately two seconds from the last trim input. If the
Increase or Decrease keys are pressed any time during
the two seconds, the system will return to the previous
screen in use.
*
*
stc
0
thc
0
stg
70∞
R A T E
Steering Trim
(page 32)
Throttle Trim
(page 32)
Steering Dual-Rate
(Grip Lever B)
(page 33)
T R I M
T R I M
aux
0
brk
50
E P A
Only present when Aux. function “O” is selected
Only present when Auxiliary function “LN” is selected
Brake Travel Adjustment
(Grip Lever A), (page 34)
(Only visible when the
Auxiliary Channel 3
function “O” has been
selected.) Refer to
Auxiliary Channel 3
function, page 18, for
clarification.
Auxiliary Channel 3
Trim Adjustment
(LN mode only)
Refer to Auxiliary
Channel 3 function,
page 34, for
clarification.
R/B