18
19
System Mode
Auxiliary Channel 3 Function Select
The Auxiliary Channel 3 function of the XS3 PRO allows
you to select from two different types of Channel 3 servo
travel movements or to inhibit the Auxiliary Channel 3
function. Use the information below to select the correct
Auxiliary Channel 3 function type for your particular
installation. It is suggested the 0 function be selected for
most applications.
(Factory preset)
0
= The 0 or Inhibit function allows the Brake End-Point
Adjustment function to be used. This function is designed
to be used with most types of electric and gas-powered
RC cars. This feature is extremely popular, as it allows the
amount of panic braking accessible through the throttle
trigger’s braking position to be adjusted during operations
for maximum effectiveness. When activated, the braking
values will be visible via the Direct Trim function, page 31.
LN
= The LN or linear servo travel function is designed
to be used when an engine fuel mixture servo is required.
This function is most commonly used with gas-powered RC
racing boats and is accessible through Grip Dial A. In this
function, the maximum travel of the servo is determined
by the End-Point Adjustment function. The servo neutral
position can be altered proportionally via the Grip Dial A
for mixture adjustment. When activated, fuel mixture trim
values are visible for the Direct Trim function, page 34.
2P
= The 2P or 2 position Servo Travel function is
designed to be used as a transmission gear shift channel.
This feature is designed for use with vehicles such as the
Traxxas
®
T-Maxx. This function is accessible through Grip
Button C or Grip Dial A if Grip Button C is occupied by
another function. In this function, the servo’s travel values
are determined by the End-Point Adjustment function.
Accessing the Auxiliary Channel 3 Function
1.
Press the
Scroll
and
Channel
keys at the same time
and hold.
2.
Turn on the transmitter power switch to enter
System mode.
3.
Press the
Scroll
key until “AUX” appears on
the screen.
4.
Press the
Increase
or
Decrease
key to select the
correct Auxiliary Channel 3 function type to be used.
5.
Press the
Scroll
key to access the Grip Button C
Select function.
6.
To exit the System mode, either turn the transmitter
power switch off or press the
Scroll
and
Channel
keys at the same time.
aux
0
Auxiliary Channel 3
Function
Channel 3 is Inhibited
(Grip Dial A braking
function is now
activated)
aux
LN
Auxiliary Channel 3
Function
Linear Movement
(fuel mixture servo)
aux
2P
Auxiliary Channel
3 Function
Non-linear
Two-Position
Movement
(Traxxas shiftable
transmission use)
Press and hold the
Scroll
and
Channel
keys at the
same time to enter the System mode. Next Press the
Scroll
key until “AUX” appears.
Press the
Increase
or
Decrease
key to select
the desired Auxiliary channel 3 function type
to be used.
0 = Inhibited (Grip Dial A braking is active)
LN = Linear servo movement
2P = 2-position servo movement
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
