JR Racing XS3 PRO, Руководство пользователя

Страница: 20 / 40

20 21
System Mode
Data Reset
The Data Reset function allows you to reset all the
programming in the selected model (1, 2, 3, ... or 10) to
the factory default settings. Before using the Data Reset
function, it is important to enter the Model Select function
and check to make sure the current model number indicated
(1, 2, 3, ... or 10) is the model to which you want to reset
to the factory default settings. The Model Select function is
described on page 15.
Accessing the Data Reset Function
1. Press the Scroll and Channel keys at the same time
and hold.
2. Turn on the transmitter power switch to enter the
System mode.
3. Press the Scroll key until “CLR” appears on
the screen.
4. Press the Increase and Decrease keys at the same
time to reset the data. To confirm that the selected
model’s programming has been reset, a beep will
sound and the model number selected (1, 2, 3, ... or
10) will stop flashing.
5. Press the Scroll key to access the Copy Model
Data function.
6. To exit the System mode, either turn the transmitter
power switch off or press the Scroll and Channel
keys at the same time.
Copy Model Data
Copy Model Data function allows you to copy the
current model data into the model memory of the blinking
model selected. Before using the Copy Model Data
function, be sure you know what model number you
want to copy the data to as all data in this selected model
will be lost. If the current model being copied from uses
the default name, the model name from the model being
copied to will be retained.
Accessing the Copy Model Data Function
1. Press the Scroll and Channel keys at the same
time and hold.
2. Turn on the transmitter power switch to enter the
System mode.
3. Press the Scroll key until “CPY” appears on
the screen.
4. Press the Increase or Decrease key to select the
desired model number you want the current model
data copied to. This model number being select
should be blinking.
5.
Press the
Increase
and
Decrease
keys at the same
time to copy the current model data into the selected
model number. To confirm that the selected model
has been copied to, a beep will sound and the model
number selected (1, 2, 3, ... or 10) will stop flashing.
6. To exit the System mode, either turn the transmitter
power switch off or press the
Scroll
and
Channel
keys at the same time.
clr
1
Model to
be Reset
Press and hold the Scroll and Channel keys
at the same time while turning the transmitter
power switch on. Next, press the
Scroll key until
“CLR” appears.
Press the Increase and Decrease keys at the same
time to reset (clear) all settings for the selected
model to the factory default settings
cpy
2
Model being
copied to
Press the Increase and Decrease keys at the same
time to copy model data from the current model to
the selected model.
Press and hold the Scroll and Channel keys
at the same time while turning the transmitter
power switch on. Next, press the
Scroll key
until “CPY” appears.
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE
SCROLL
ENTER
CHANNEL
INCREASE
CLEAR
DECREASE