JR ProPo XG6, Руководство по эксплуатации

Страница: 43 / 84

41
By default, this is set to “INH”. Select Normal for using a Normal Program Mix curve. To “INH” this function,
move the cursor to the Master/Slave channel selection, then press the dial.
፧
Mixing Reference Point Offset (OFFSET)
By setting an OFFSET, the mixing Reference Point can be changed to the desired Mixing point on the Master
Channel.
⿟ Curve Mixing
By default, this is set to “INH”. Select
CURVE for using Curve type Program
Mixing. To “INH” this function, move
the cursor to the Master/Slave channel
selection, then press the CLR key.
፧ Curve Point Setting
It is possible to set up to five (5)
mixing curve points at desired
positions. Initially, there are three
curve points set - a Low point,
Center point and High point. To
add more points, select the Master
channel and move the cursor to
ADD and press the dial. Or to delete
a point, move the cursor to DEL
and press the dial. To change the
value at a point, move the cursor
to the location where you wish to
make the change then press dial to inverse the display, and input the numeric value.
፧ Exponential function
By activating mix Exponential, it is possible to smooth the transition between points on the curve.
Exponential (EXP)
Adjustment point
Numerical value of Input and
output for stick position
Input position and
output value on each
adjustment
Addition/deletion of points
ADD/NON/DEL
Mixing value for each position
SW Select
Switch Select Display
Slave Channel Selection
Mixing position
Mixing Reference Point Offset (OFFSET)
Coupled with throttle stick (THRO STK)
※Only with Airplane mode
Coupled with throttle stick (THRO STK)
※ Only with Airplane mode
As a Example
Position
Master Channel Selection
Master Include Function
Function▋List
Exponential (EXP)
Adjustment point
Numerical value of Input and
output for stick position
Input position and
output value on each
adjustment
Addition/deletion of points
ADD/NON/DEL
Mixing value for each position
SW Select
Switch Select Display
Slave Channel Selection
Mixing position
Mixing Reference Point Offset (OFFSET)
Coupled with throttle stick (THRO STK)
※Only with Airplane mode
Coupled with throttle stick (THRO STK)
※ Only with Airplane mode
As a Example
Position
Master Channel Selection
Master Include Function
Exponential (EXP)
Adjustment point
Numerical value of Input and
output for stick position
Input position and
output value on each
adjustment
Addition/deletion of points
ADD/NON/DEL
Mixing value for each position
SW Select
Switch Select Display
Slave Channel Selection
Mixing position
Mixing Reference Point Offset (OFFSET)
Coupled with throttle stick (THRO STK)
※Only with Airplane mode
Coupled with throttle stick (THRO STK)
※ Only with Airplane mode
As a Example
Position
Master Channel Selection
Master Include Function
XG6.indd 41 12/03/01 16:03