JR ProPo XG6 Скачать руководство пользователя страница 40

Страница: 40 / 84

▋

Camber▋system【CAMBER▋SYSTEM】

▋

Function▋Explanation

It is possible to set up a glider which has full span ailerons or flaps . These control surfaces can

be moved up and down simultaneously to change the wing camber. Because changing the wing camber can vary

the rate of descent and the drag, it is possible to change the flight endurance and the glide ratio. These settings

can be changed for each Flight Mode. In addition, because the delay time during transition can be adjusted, the

aircraft will not react suddenly or Wildly to these changes.

▋

Setting▋Method

Set the amount of Camber (Aileron or Flap) offset in each flight mode.

It is possible to set a desired time “DELAY” in the menu.

⿟ Offset Value (OFFSET)

Set the Offset value for both FLAP and Aileron for each flight mode.

፧

AILERON

Set offset values for each Aileron - Left Aileron (LAIL) and Right Aileron (RAIL)

፧

FLAP

Set a single Flap offset using “FLAP”. For “Dual Flaps” set the “LFLP” (Left Flap) and “RFLP” (Right Flap) values
independently.

⿟ Time Delay (DELAY)

Set the Time delay when switching between different flight modes. “INH” is no Time Delay. The time delay

duration can be set between 0.1 to 6.0 seconds. “HOLD” means without Time Delay. This time delay also affects

the trim, in addition to the offset values. The following Trims may be affected.

፧

Flap Trim 「FLAP TRIM」

፧

Flaperon Trim

「FPRN TRIM」

፧

Elevator Trim

「ELEV TRIM」

▋

Caution▋Note

⿟ Actually operate the servos and carefully confirm the settings before flight.

DANGER

CAUTION

Helicopter

Airplane

Glider

WARNING

Function▋List

Time Delay(DELAY)

Oﬀset Value (OFFSET)

Flight Mode Select

XG6.indd 38

12/03/01 16:03

Содержание XG6





















































































Результаты поиска

Содержание XG6

Отзывы:

Бренды по названию

Популярные бренды

JR ProPo XG6, Руководство по эксплуатации

Результаты поиска

Содержание XG6

Отзывы:

Бренды по названию

Популярные бренды