Page 30 XBase 09 Operating Manual
For every sequencertrack exists an individual accenttrack. Accents are programmed the same way
drumaccents are programmed (chapter 5.4, P.17 ). When accent is setted, a velocity of 127 is
putted out via Midi, without accent a velocity of 64.
Maybe at first, it will take a bit of getting used to programm the sequencer but after a short
practicetime you will be familiar with it.
7. SONG MODE
In Song mode prerecorded patterns are chained together and played back as complete songs. To
get into Song play mode, press the SONG button
7.1 Song play mode.
Use the UP/DOWN buttons to select one of ten available song memory slots.
Press the START button to start playback of the selected song. At every song step, the display
will show the pattern number and then switch the display to show how often that pattern will still
be played.
7.2 Song Write mode.
While in Song mode (Song button is lit) press the WRITE button to get into Song Write mode.
Pattern chains are programmed by setting song step numbers, pattern numbers and the number of
pattern reptitions.
Use the instrument buttons to program pattern chains.
7.2.1 Song-Step (BASS DRUM button)
Press the BASS DRUM button. The display reads "Ste".
A song step comprises a pattern number and the number of run-throughs of this pattern.
A song always begins with step 001. The maximum number of song steps per song is 100 (001 -
100).
Use the UP/DOWN buttons and the DATA knob to select the song step you wish to edit. Confirm
your choice by pressing ENTER.
Pressing ENTER will automatically switch to the next song step.
7.2.2 Pattern Nr. (SNARE DRUM button)
Press the SNARE DRUM button. The display reads "PAt".
Use the UP/DOWN arrows to choose the pattern you want to assign to the current song step. Press
ENTER.
Содержание Xbase 09
Страница 1: ...XBase 09 Operating Manual Software Version 2 09 9...
Страница 2: ...Page 2 XBase 09 Operating Manual...