Jomox Xbase 09, Руководство по эксплуатации

Страница: 18 / 37

Page 18 XBase 09 Operating Manual
ACCENT / TEMPO FINE
In Pattern and Perform - Write mode, the ACCENT button serves to select the ACCENT track of
the currently active instrument. This is indicated by simultaneous blinking of both the ACCENT
LED and the LED of the respective instrument. Pressing the ACCENT button again switches back
into the instrument track. Pressing an instrument button while ACCENT is active also switches
ACCENT off again. ACCENT intensity is is globally controlled by the ACCENT knob in all
PLAY modes (PERFORM, PATTERN, SONG) and is valid for all instruments.
Setting the tempo with the ACCENT button:
Hold down the ACCENT button. Now you can increase or decrease the tempo with the
UP/DOWN buttons in steps of a single BPM.
Using the Accent button to make the Xbase09 display an absolute parameter value
Hold down the ACCENT and turn the desired knob. You thereby obtain the absolute value
corresponding to the knobs position (full left: 0, full right: 127), as opposed to the knob's additive
value.
Bank LEDs
The bank LEDs indicate which Pattern bank is active. There are 4 banks, each containing 16
patterns.
Scale LEDs
The scale LED indicates the note length of a step (scale) of the current pattern.
4.2.10 Mode select buttons PERF, PATT, SONG, WRITE
The mode buttons serve to select the Xbase09's various operating modes (see next chapter !).