Jomox Xbase 09, Руководство по эксплуатации

Страница: 7 / 37

XBase 09 Operating Manual Page 7
2. CONNECTING THE XBASE 09
Before you connect the Xbase09 to any other device, you should always switch off all the
involved devices.
2.1 Back Panel
You will find the following connections on the Xbase09's Back Panel:
12V~AC IN ON/OFF MIDI IN MIDI OUT MIDI THRU DIN SYNC HH OUT SD OUT BD OUT MIX OUT
2.2 Power Supply
Insert the power supply unit shipped with the Xbase09 into a power outlet and connect it to the
power supply socket labelled 12V~ AC IN on the Xbase09's back panel. Should you for some
reason not use the original power supply unit, make sure you are using one that provides
alternating current (AC/AC) with 12 volts and at least 1 ampere.
NEVER use an AC/DC power supply unit, as this can permanently damage the Xbase09.
2.3 Audio Connections
Switch off the Xbase09 and your mixer. The Xbase09 has a MIX output which carries the audio
signals of all instruments provided there are no plugs inserted into one of the individual outputs.
Individual outputs are provided for the bass drum, the snare drum and the hihat section. As soon
as a jack plug is inserted into one of these individual outputs, that instrument is no longer played
back through the Xbase09's MIX output. Connect the required outputs to your mixer's inputs with
1/4" jack plug cables.