Jomox Xbase 09, Руководство по эксплуатации

Страница: 9 / 37

XBase 09 Operating Manual Page 9
3.0 Quick start guide
Turn unit on (back panel)!
Turn up the master Volume control (upper right of the machine).
Turn up the individual volumes (BD Level, SD Level and HH level at lower center).
3.1 To listen to sample patterns already programmed into the XBase-09
Hit the Pattern button (labeled „Patt", on the right of the machine).
Use the Up/Down keys to scroll down to Pattern 1 (LED display will read „P01").
Hit the Start button (on the left of the machine).
To adjust tempo to your liking keep the Accent-Button pressed down and use the
Tempo/Data knob (on the right of the machine).
Using the Up/Down buttons you can change patterns while the machine is in play.
To learn more about how the Xbase is making the sounds it is, you can „solo" the Bass, Snare or
HiHat channel by turning down the individual volumes of the other two channels.
If you hear interesting „swooshing sounds" in some of the Patterns, these sounds are being
generated by one of the two onboard LFO sections (which can run „free", be triggered on each hit
or sync'ed to Midi).
You may come across Patterns that are long enough to occupy two Pattern spaces. To move past
these Patterns once you've listende to them, hit the Stop button, then the Patt button and you can
once again use the Up/Down keys to scroll past these special Patterns.
3.2 To play with the sounds in the XBase-09
Hit the Pattern button (labeled Patt) and use the Up/Down keys to scroll until the display reads
„P01". Now hit the Peformance button (labeled Perf). You can hit any of the Instrument pads at
the bottom of the front panel and turn the appropriate controls above (for the Bass Drum, turn the
Bass Drum controls, etc.). Twiddle the knobs! Have fun! The controls are highly interactive, so
be prepared to hear a lot of different sounds as you turn knobs.
If you'd like to hear the Bass Drum playing without having to hit the pad, simply hit the „Start"
button (on the left of the machine). If you want, you can „solo" the Bass Drum by turning down
the Snare and HiHat volumes. If you'd like to adjust the tempo, turn the Tempo control (on the
right of the machine). You can still play with the knobs now!
Now, turn down the Bass Drum volume and „solo" the Snare by turning up its volume. Play with
the Snare controls. Try the Hat section, as well. The Clap, Rim, Crash, Ride and Noise Samples,
and the Reverse versions of all of those are best explored within the Pattern context described
below.
While the machine is playing, you can hear different pre-programmed „drum kits" by simply
hiting the Up/Down keys. Also, while the machine is playing, sou can change the Pattern you are
listening to simply by hitting one of the buttons labeled 1 to 16. To switch „drum kits" while
hearing this new pattern, simply hit the Up/Down keys. There are 100 ROM kits preprogrammed
in the machine. They are stored in the memoryslots
r00
to
r99
.