Page 32 XBase 09 Operating Manual
8. Saving and Restoring the Xbase09's data via MIDI dump
8.1 Saving the Xbase09’s memory to an external MIDI data recorder
You can save the Xbase09's memory contents (patterns, kits and songs) to an external MIDI
device (datadisk, sequencer, keyboard etc.) This data can be transmitted back to the Xbase09
later, which allows you to clear its memory for new drum kits, patterns and songs.
Saving data to an external MIDI device
Press SHIFT and the Midi Mode button. Press the UP button until the display reads "dMP"
(dump).
Make sure your external MIDI device is ready to receive MIDI SysEx data.
Press ENTER on the Xbase09. This will start MIDI SysEx data transmission from the Xbase09 to
the MIDI recording device. While this is in progress, the display will read "bSY" (busy).
After about 20 seconds, the display will read "rDY" (ready) which indicates that all data has been
transmitted.
8.2 Loading Xbase09 data from an external MIDI data player.
To load back externally stored Xbase09 data into the Xbase09's memory, press SHIFT and the
Midi Mode button. Press the UP button until the display reads "Ld" (load).
Press ENTER to make the Xbase09 ready to receive data.
Start data transmission on the external MIDI device (could also be another Xbase09...) The
display will read "rCV" (receive) to indicate that it is receiving data.
If MIDI data reception has been successful, the display will read "fin" (finished) after a few
seconds.
Содержание Xbase 09
Страница 1: ...XBase 09 Operating Manual Software Version 2 09 9...
Страница 2: ...Page 2 XBase 09 Operating Manual...