Jolimark DP320, Руководство пользователя

Страница: 27 / 45

DP320 User's Manual
- 23 -
the scale on the printer as a guide. The printer prints to the right of the position marked 0.
Note: Make sure your paper supply is positioned within 1 meter (3 feet) of the printer.
5. Slide the left sprocket unit so that its sprockets match the position of the holes in the paper
and lock the unit in place. Then slide the right sprocket unit to match the width of your paper,
but do not lock it. Move the paper support midway between the two sprocket units.
6. Make sure your paper has a clean, straight leading edge. Open the sprocket covers. Fit the
first holes of the paper over the sprocket pins and then close the sprocket covers. Slide the
right sprocket unit to remove any slack in the paper and lock it in place.
7. To separate the incoming paper from the printed paper, attach the paper guide. Hold it
horizontally and fit its notches over the printer’s mounting posts. Then slide the paper guide
toward the back of the printer until you feel it click.
8. Slide the left edge guide to the center until it stops at the diamond-shaped guide mark; slide the
right edge guide to the opposite guide mark.
9. Attach the printer cover and adjust the paper position with the knob. Turn the knob until the
perforation between pages is just above the print head.
Figure 3-13 Insert the continuous paper into the paper slot
Figure 3-14 Adjust the position of the sprocket
Figure 3-15 Load paper in the pull tractor