manualshive.com logo in svg

Johnson Controls York YHAU-C, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Johnson Controls York YHAU-C Скачать руководство пользователя страница 141

Date and time

After you press the 

Date and Time

 button, the Date and Time screen displays. Use the following

procedure to make changes.

Note: 

To enter the date information, the format is: YYYY / MM / DD.

Figure 67: Date and time

1.  Press the 

Change

 button.

2.  Enter the correct date and time.

3.  Press the 

Set

 button to set the time.

4.  Press the 

Start

 button to restart the clock.

If the clock is not keeping the correct time, use the following to fix it:

1.  Press the 

Correct

 button to specify a correcting amount (+ or -).

2.  Press the 

Set

 button to update the time.

Operation switch

In this screen section, choices can be made about the mode of operation for the various devices.

Use the buttons to make your choice. The choices are:

Forced Dilution:

 indicates whether forced dilution is ON or OFF.

Refrigerant Pump:

 indicates whether the refrigerant pump is operating automatically (Auto mode)

or is stopped (Stop mode)

Purge Mode:

 The 

Auto

 and 

Manual 

buttons control the purge operation. The lit button indicates if

the purge mode is Automatic or Manual.

Manual Purge:

 The 

ON

 and 

OFF

 buttons control the manual purge operation. The lit button tells

you if the manual purge operation is running or not. If you press the Purge Mode 

Auto

 button, the

purge is done automatically. If you press the Purge Mode 

Manual

 button, the purge starts when

you press the Manual Purge 

ON

 button. The purge stops when you press the Manual Purge 

OFF

button.

139

YHAU-C Single Effect Steam-Fired Absorption Chiller

Содержание York YHAU-C





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды