TEC2103-2 Networked Multi-Stage Thermostat Installation Instructions
15
Table 4: Entering Permanent Temperature
Setpoints (Cont.)
Press YES to change the occupied
heating setpoint. Press NO to
advance to unoccupied cooling
setpoint menu.
Use the UP/DOWN arrow keys to
set temperature. Press YES to store
value and advance to next menu.
Press YES to change the
unoccupied cooling setpoint. Press
NO to advance to the unoccupied
heating setpoint.
Use the UP/DOWN arrow keys to
set temperature. Press YES to store
value and advance to next menu.
Press YES to change the
unoccupied heating setpoint. Press
NO to advance to temperature
display units.
Use the UP/DOWN arrow keys to
set temperature. Press YES to store
value and advance to next menu.
Press YES to set the display units to
°
F or
°
C. Press NO to advance to
temperature setpoint type menu.
This only changes the local display.
Press YES to return to the Status
Display Menu or NO to re-enter the
temperature setting menu.
Entering Temporary Temperature Setpoints
To temporarily change the setpoint, press the
UP/DOWN arrow keys to change the temporary
setpoint for the current mode of operation.
Note:
Whether the thermostat is heating or cooling,
the respective setpoint will be temporarily adjusted.
Note:
To toggle between the temporary heating and
cooling setpoints, press the NO key while changing
the temporary setpoints.
Note:
If a setpoint is overridden over the
N2 network, it appears the setpoint value can be
changed through the TEC2103-2 thermostat, but the
setpoint is actually still held at the overridden value.
If the heating and cooling setpoints are overridden
such that the deadband is violated, the TEC2103-2
thermostat automatically changes one of the setpoints
to maintain the deadband.
Ending Temporary Temperature Setpoints
The temporary setpoints remain in effect for the
duration set in the Temporary Occupancy Time
parameter (TOccTime) or until manually released.
To release the temporary setpoint prior to the
Tocc time, while in the main User Menu, answer YES
to the first prompt to appear.
Press MENU again and YES to exit the Main User
Menu, or leave the thermostat unattended for
45 seconds, and the display resumes scrolling.
The setpoint reverts to the Permanent Temperature
Setpoint.
Heating
set? Y/N
Heating
68.0
°
F
Unocc CL
set? Y/N
Unocc CL
80.0
°
F
Unocc HT
set? Y/N
Unocc HT
62.0
°
F
°
F/
°
C
set? Y/N
Exit?
Y/N
