TEC20x6(H)-4 and TEC20x6H-4+PIR Series Wireless Thermostat Controllers with Dehumidification
Capability, Fan Control, and Occupancy Sensing Capability
24
Technical Specifications
Table 8: Accessories (Order Separately)
Code Number
Description
SEN-600-1
Remote Indoor Air Temperature Sensor
SEN-600-4
Remote Indoor Air Temperature Sensor with Occupancy Override and LED
TE-6361M-1
1
Duct Mount Air Temperature Sensor
TE-636S-1
Strap-Mount Temperature Sensor
TEC20-A-1
Replacement Antenna for TEC20 Coordinator
TEC20-RA-1
2
Remote Antenna for TEC20 Coordinator
NPB-PWR
3
DIN Rail Mount 24 VAC/DC Power Module for TEC20 Coordinator
TEC20-8X-1
120 VAC to 15 VDC Power Supply for TEC20 Coordinator
TEC20-9B-1
Replacement Battery Pack for TEC20 Coordinator
TEC-6-PIR
4
Cover with Occupancy Sensor
TEC-6H-PIR
5
Cover with Occupancy Sensor for Hospitality Models
1.
Additional TE-636xx-x Series 10k ohm Johnson Controls Type II Thermistor Sensors are available; refer to the
TE-6300 Series Temperature Sensors Product Bulletin (LIT-216320)
for more details.
2.
This antenna is used when the TEC Coordinator is installed inside a metal cabinet, or when a remote antenna is required by
physical installation.
3.
DIN Rail: Type NS35/7.5 (35 x 7.5 mm) and DIN rail end clips. Length of DIN rail depends on the number of DIN rail
mounted options.
4.
The TEC-6-PIR Accessory Cover can be used to replace the existing cover on a non-PIR TEC20x6-4 Series Thermostat
Controller to provide occupancy sensing capability.
5.
TEC-6H-PIR Accessory Cover can be used to replace the existing cover on a non-PIR TEC20x6H-4 Series Thermostat
Controller to provide occupancy sensing capability.
TEC20x6(H)-4 and TEC20x6H-4+PIR Series Wireless Thermostat Controllers with
Dehumidification Capability, Fan Control, and Occupancy Sensing Capability (Part 1 of 2)
Power Requirements
19 to 30 VAC, 50/60 Hz, 2 VA (Terminals 4 and 5) at 24 VAC Nominal, Class 2 or
Safety Extra-Low Voltage (SELV)
Relay/Triac Contact Rating
On/Off and Floating Control:
19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum,
3.0 A In-Rush, Class 2 or SELV
Analog Output Rating
Proportional Control:
0 to 10 VDC into 2k ohm Resistance (Minimum)
Fan Relay Output Rating
19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A In-Rush, Class 2 or SELV
Auxiliary Output Rating
Triac Output:
19 to 30 VAC, 1.0 A Maximum, 15 mA Minimum, 3.0 A In-Rush
Binary Inputs
Voltage-Free Contacts across Terminal Scom to Terminals BI1, BI2, or UI3
Analog Inputs
Resistive Inputs (RS and UI3) for 10k ohm Johnson Controls Type II Negative
Temperature Coefficient (NTC) Thermistor Sensors
Wire Size
18 AWG Maximum, 22 AWG Recommended
Recommended Transmission
Range
Through Walls:
10 m (30 ft)
Line-of-Sight (Open Space):
30 m (100 ft)
RF Band
Direct-Sequence Spread-Spectrum Transmission; 2.4 Ghz unlicensed band
Transmission Power
10 mW Maximum
Temperature Range
Backlit Display:
-40.0°C/-40.0°F to 50.0°C/122.0°F in 0.5° increments
Heating Control:
4.5°C/40.0°F to 32.0°C/90.0°F in 0.5° Increments
Cooling Control:
12.0°C/54.0°F to 38.0°C/100.0°F in 0.5° Increments
Temperature Sensor Type
Local 10k ohm Negative Temperature Coefficient (NTC) Thermistor
Resolution
±0.1C°/±0.2F°
