D-308439 MP-802 PG+ Rev.0
Mounting the device using tape
1.
Peel the release liners off the two strips of double-sided adhesive tape and attach the tape to
the back of the bracket.
See Figure 7 A for flat surface mounting and B for corner surface mounting.
Figure 7: Double-sided adhesive tape placement on the bracket
2.
For corner surface mounting, ensure the corner mounting insert is attached to the back of
the corner bracket. See Figure 10 B.
3.
Mount the bracket on the wall.
4.
Align the device with the bracket. See A1 in the figure below.
5.
Slide the device upward until a click is heard. See A2 and A3 in the figure below.
Figure 8: Attaching the device to the flat bracket
10
MP-802 PG+ Wireless PIR Motion Detector Installation Guide
