D-308439 MP-802 PG+ Rev.0
Configuring the device parameters
1. Enter the
DEVICE SETTINGS
menu and select the required configuration as described in the
following table.
Table 1: Configuration options
Option
Action
Alarm LED
Define whether the alarm LED indication will be activated.
Optional settings:
LED ON
(default) and
LED OFF
.
Event counter
Define whether an alarm will be activated upon continued
motion (low sensitivity) or upon a single alarm event (high
sensitivity).
Optional settings:
LOW sensitivity
(default) and
HIGH
sensitivity
.
Disarm activity
Define whether the device is active when the system is
disarmed.
Optional settings:
NOT Active
(default),
no delay
,
5 s delay
,
15 s delay
,
30 s delay
,
1 min delay
,
2 min delay
,
5 min delay
,
10 min delay
,
20 min delay
and
60 min delay
.
VERY HOT > 35°C [>95°F]
Define whether or not the control panel will report a very
hot alert when the temperature rises above the threshold
value for at least the
Alert Delay
duration value. Alert restore
will occur when the temperature drops
1°C
(1.8°F)
below the
threshold for at least the
Restore Delay
duration.
Note:
The default threshold value for very hot is 35°C
(95°F).
Optional settings: See Configuring the Temperature Alerts.
COLD < 19°C [<66°F]
Define whether or not the control panel reports a cold alert
when the temperature drops below the threshold value for at
least the
Alert Delay
duration. Alert restore occurs when the
temperature rises
1°C
(1.8°F)
above the threshold for at least
the
Restore Delay
duration.
Note:
The default threshold value for cold is 19°C (66°F).
Optional settings: See Configuring the Temperature Alerts.
4
MP-802 PG+ Wireless PIR Motion Detector Installation Guide
