manualshive.com logo in svg

Johnson Controls (H,Y,C)IDM030B21E, Инструкция по эксплуатации

Поделиться
Скачать
Johnson Controls (H,Y,C)IDM030B21E Скачать руководство пользователя страница 28

2-14 

TC-16004-rev.2

DUCTED MEDIUM STATIC (ECONOFRESH)

2.15.2  Standard Operation Sequence

I.U.:  Indoor Unit

Auto Cooling/Heating

Operation

I.U. Air

Intake

Temp.

I.U. Air

Intake

Temp.

< Set Temp.

< Set Temp.

> Set Temp.

> Set Temp.

> Set Temp.

> Set Temp. +1

o

F

 

(0.5

o

C)

> Set Temp. +3

o

F (2

o

C)

< Set Temp. -3

o

F (2

o

C)

< Set Temp. -1

o

F 

 

(0.5

o

C)

Heating

Mode

Cooling

Mode

I.U. Air

Intake

Temp.

Fan

Mode

Fan

Mode

I.U. Air

Intake

Temp.

I.U. Air

Intake

Temp.

< Set Temp.

NOTE:

I.U fan operates continuously when in Cooling, Heating and Fan Mode.

■  Cooling Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

■  Dry Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

■  Heating Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

■  Automatic Cooling and Heating Operation

It is applicable only for the Heat Recovery System.

■  Defrosting Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

Содержание (H,Y,C)IDM030B21E



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды