Johnson & Starley WARMCAIR C16D, Руководство пользователя

Страница: 3 / 44

3 Sales/Spares & Replacement Help Line 01604 762881
In the interest of continuous development Johnson and Starley reserve the right to change specification without prior notice. Johnson and Starley
prides itself on it’s ability to supply spare parts quickly and efficiently.
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
LEAVE THESE INSTRUCTION WITH THE USER OR AT THE GAS METER AFTER
INSTALLATION
The Benchmark Scheme The Benchmark Scheme
Benchmark places responsibilities on both manufacturers and installers. The purpose is to ensure that customers are provided Benchmark places responsibilities on both manufacturers and installers. The purpose is to ensure that customers are provided
with the correct equipment for their needs, that it is installed, commissioned and serviced in accordance with the manufacturer’s with the correct equipment for their needs, that it is installed, commissioned and serviced in accordance with the manufacturer’s
instructions by competent persons and that it meets the requirements of the appropriate Building Regulations. The Benchmark instructions by competent persons and that it meets the requirements of the appropriate Building Regulations. The Benchmark
Checklist can be used to demonstrate compliance with Building Regulations and should be provided to the customer for future Checklist can be used to demonstrate compliance with Building Regulations and should be provided to the customer for future
reference. reference.
Installers are required to carry out installation, commissioning and servicing work in accordance with the Benchmark Code of Installers are required to carry out installation, commissioning and servicing work in accordance with the Benchmark Code of
Practice which is available from the Heating and Hotwater Industry Council who manage and promote the Scheme. Practice which is available from the Heating and Hotwater Industry Council who manage and promote the Scheme.
Visit www.centralheating.co.uk for more information. Visit www.centralheating.co.uk for more information.
CONTENTS
The Benchmark Scheme 3
1 Features 4
2 General Description 4
3 Building Standards & Regulations 5
4 Safety & Gas Information 6
General Safety Information
Gas Categories
Gas Supply
5 Technical Data 6
6 Heater Positioning 7
7 Heater Compartment Clearances 7
8 Duct System 8
Return Air
Warm Air Delivered
9 Flue Instructions 9
Flue Configuration
Diagram of Terminall Position
Types of Flue Systems
Plume Terminal Outlets
Flue Requirments & General Information
Conventional 60/100mm Flue Accessories Part No’s
Optional Roof Outlets
The Extended Horizontal Fle System
11 Condensate Pump & Drain Tube 14
Condensate Pump
Technical Data
Condensate Tube Routing Options
11 Gas 15
12 Electrical 15
Mains Supply
Thermista-stat & It’s Location
13 Fitting Instructions 16
14 Commissioning 16
System Balancing
Lighting the Main Burner
Gas Rate Check
15 Handing Over 18
16 Servicing & Maintenance 19
Servicing Schedule
Servicing Sequence
Component Checklist
Gaining Access for Servicing
Main Burner Assembly
Ignition & Flame Detection Electrode
Heat Exchanger/Combustion Chamber
Combustion Air Fan
Air Circulations Fan
Condensate Drain Piped
Condensate Pump
17 Parts Replacements 23
Control Panel
Air Circulation Fan
Return Air Temperature Sensor
Flue Temperature Sensor
High Limit Temperature Sensor
Air Pressure Switch
Condensate Drain Pump
Main Ignition/Control PCB
Gas Valve & Venturi Assembly
Burner Assembly
Ignition Electrodes
Flame Detections Electrodes
Combustion Air Fan
18 Control Panel Modes 26
19 Fault Code & Blocking Code Table 27
20 Fault Finding Flowcharts 28
21 Defect Diagnosis for the 30
Circulation Air Fan
22 Functional Wiring Diagrams 31
23 Dimensions 32
24 List of Spares 34
25 Important Information 37
26 Code of Practice 38
27 Benchmark Checklist 49
and Service Record