19
Installation of the appliance
Distances
Electrical connection
The connection terminals are located at the
rear of the appliance. For electrical
connections see following diagram.
Caution!
This appliance may be
installed next to a wall which is
higher than the appliance, as
shown in the diagram showing the
correct installation conditions.
Any wall cupboards or shelves
must be at a distance of at least
750 mm above the work surface.
Caution!
Check that the voltage
and dimensioning of the supply
line correspond to the
characteristics shown on the
plate fixed to the rear protective
cover of the appliance.
This plate must never be
removed.
Caution!
If the appliance is
connected to the supply by means
of a fixed connection, install a
multipolar cut-out device on the
line, with contact opening
distance equal to or greater than
3 mm
, located near the appliance
and in an easily reachable
position.
For operation on Cable type H05V2V2
380-415V3N~
five-core cable
(5 x 2.5 mm²)
