![Joerns WeCare Bed Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/joerns/wecare-bed/wecare-bed_user-and-service-manual_2021335009.webp)
9
Joerns® Bed Frames
WeCare™ Bed
© 2022 Joerns Healthcare • 6110435 RevC • 22-2083
Installation Of Head and Foot Panels
Refer to Bed Panel Installation Sheet for more
Tools required: #2Phillips screwdriver
Head Panel Installation:
1.
Head panel has label on back.
2.
Lay panel on soft surface front face down.
3.
Head panel brackets are longer of two sizes
(Figure 19).
4. Install head panel brackets with four screws
provided. Bracket offset should face up (Figure
20). Do not tighten until after fitting mounting
brackets into bed sockets.
5.
Go to final assembly below.
Frame-Mounted Foot Panel Installation:
1. Foot panel does not have label on back. Foot
panel will have staff control electronics, if staff
control was ordered.
2.
Lay panel on soft surface front face down.
3.
Foot panel brackets are shorter of two sizes
(Figure 19).
4. Install the foot panel brackets with four screws
provided. Bracket offset should face up (Figure 20)
Do not tighten until after fitting mounting brackets
into bed sockets.
5.
For foot panel with optional staff control, refer to
next page for install instructions and cable routing.
6.
Go to final assembly below.
Final Assembly Step for Head Panel and Frame-
Mounted Foot Panel:
1. Insert head and foot panel as shown with
mounting hardware facing head of the bed
(Figure 21).
2. Tighten all screws with panels in place.
3. Panels should slip in and out of their sockets
easily and securely.
Figure 19
Head Panel
Bracket-10.5"
Foot Panel
Bracket-6.9"
Offset facing up
Figure 20
Figure 21