14
Joerns® Bed Frames
WeCare™ Bed
© 2022 Joerns Healthcare • 6110435 RevC • 22-2083
To Maximize Service Life
1. Keep the bed clean.
2.
Observe bed operation and report any
discrepancies or problems to Joerns Healthcare
Technical Support at 800.826.0270
3.
After initial week of use, check all threaded
fasteners for looseness, and make sure all pins
are in their normal location and fastened securely.
Check monthly for loose bolts, nuts, pins and other
retaining hardware. Tighten any loose hardware,
and contact Joerns Healthcare to order any
appropriate service parts.
4. Make sure each inspection includes the underside
of the bed frame and mattress support platform.
Check joints between sleep surface sections for
loose fasteners.
5.
Visually inspect the bed frame and accessories
for any cracking, bending, or hole enlargement.
If found, contact Joerns Technical Support at
800.826.0270, remove the bed from service
immediately, and replace the affected parts.
6.
Check wiring for proper connections and damage
(fraying, kinking, or deterioration). Report any damage
to Joerns Technical Support at 800.826.0270
7. Check actuators for correct mounting at
attachment points and ensure all related pins are
mounted securely and properly to the bed frame.
Actuators are not serviceable, but are replaceable
if required.
8. Lubricate pivot point, pins and bolts as required.
The recommended lubricant is Joerns-approved
grease #12500013, available from Joerns
Technical Support at 800.826.0270.
Caution:
Avoid using liquid lubricants to avoid causing
a slip hazard.
9. Properly stow pendant. Place pendant in pendant
holder right side up, or use hook to avoid excessive
bending of cable. Avoid dropping or stretching
pendant during use to maximize service life.
Cleaning
Caution:
Possible damage to electrical parts, and/or
shock hazard.
Warning: Possible Injury or Burns.
Do not use
flammable liquids or solvents to clean the bed, its
components, or surfaces placed on top of it.
Clean all electrical components (actuators, control box,
pendant and cables) on your Joerns
®
bed with a damp,
well-wrung cloth. Excess water in or on electrical parts
can damage these components.
Do not submerge the pendant in liquid.
Your Joerns
®
bed has a durable, baked-on epoxy
finish, easily cleaned with mild solution of antiseptic
cleaner and warm water. Read and follow all label
instructions on cleaning products.
Other Suggested Cleaners
•
3% hypochlorite or equivalent
•
Quaternary cleaners (active ingredient - ammonium
chloride)
•
Phenolic cleaners (active ingredient - o-phenyl phenol)
•
Chlorinated bleach solution (5.25% - less than 1 part
bleached to 100 parts water)
Wood veneer surfaces should be maintained by cleaning
with furniture polish or lemon oil. Laminate surfaces
should be maintained by cleaning with disinfectant spray.
Maintenance and Inspection Information
Visually inspect bed and accessories for broken welds or
cracks, and check for loose hardware on a monthly basis.
If any broken welds or cracks are found, remove bed from
use /service immediately and replace affected part(s).
Visually inspect cable routing for pinched or frayed cables.
Any loose hardware should be tightened.
If you require further assistance, contact Technical
Support at 800-826-0270.
End of Life Disposal
•
Many components of this product may be recycled.
•
Please dispose of non-recyclable items properly.
To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of
material resources.
