7
Joerns® Bed Frames
WeCare™ Bed
© 2022 Joerns Healthcare • 6110435 RevC • 22-2083
6. Line up back and knee actuators and insert
actuator pin then add clip to lock in place (Figure 7
and 8). Ensure the washers are used on the back
actuator (Figure 9).
7.
Locate back actuator and head end hi-lo cables
and route through safety pin bail (Figure 6), then
route behind cable bundle (Figure 10 and 11).
8.
Insert back actuator cable in port 1 and insert hi-lo
actuator head end cable in port 3 (Figure 12).
9. Secure cables with cable clamp (Figure 13).
10.
Route power cord in grey clips to head end.
Plug-in power cord to power source and raise the
bed frame.
Note:
Watch for obstructions.
Figure 7
Figure 8
Figure 10
Figure 11
Figure 12
Figure 13
Figure 9
