background image

2

Joerns

®

 Support Surfaces

DermaFloat

®

 APM

Important Precautions

Important Notice: 

The equipment must be installed 

and operated in the manner for which it was intended. 

Facility staff/user is responsible for reading and 

understanding the product user manual and contacting 

Joerns Healthcare, if anything in this manual is 

unclear. Joerns will not be held responsible for any 

injuries resulting from failure to comply with the 

instructions and precautions in this manual.

Warning: 

Joerns’ specialty support surfaces are 

designed as mattress replacement systems. The 

risk of entrapment may occur when the equipment is 

placed on bed frames that leave gaps of even a few 

inches between the mattress and the head panel, foot 

panel, and bed or side rails. The equipment is NOT to 

be used when such gaps are present. 

Facility staff/user is responsible for ensuring that all 

mattresses properly fit the bed frames. Joerns is not 

responsible for the placement of its equipment on bed 

frames that leave gaps between the mattress and 

the head panel, foot panel or bed or side rails which 

present a risk of harm to residents.

Warning:

 An optimal bed system assessment should 

be conducted on each resident by a qualified clinician 

or medical provider to ensure maximum safety of 

the resident. The assessment should be conducted 

within the context of, and in compliance with, the state 

and federal guidelines related to the use of restraints 

and bed system entrapment guidance, including 

the 

Clinical Guidance for the Assessment and 

Implementation of Side Rails

 published by the Hospital 

Bed Safety Workgroup of the U.S. Food and Drug 

Administration. Further information can be obtained  

at the following web address: http://www.fda.gov/

MedicalDevices/ProductsandMedicalProcedures/

GeneralHospitalDevicesandSupplies/HospitalBeds/

default.htm.

When using the mattress system, always ensure that 

the resident is positioned properly within the confines 

of the bed. Do not let any extremities protrude over 

the side or between the bed rails when the mattress is 

being used.

Danger: Explosion Hazard: 

Do not use in the 

presence of flammable anesthetics. Do not use in 

the presence of smoking materials or open flame. 

Air flowing through the air mattress will support 

combustion.

Danger:

 To reduce the risk of shock, adhere to the 

following instructions. Failure to do so could result in 

personal injury or equipment damage.

•  Immediately after using the DermaFloat

®

 APM, 

unplug it from its power source.

•  Do not place or store the product where it can fall 

or be pulled into a tub or sink.

•  Do not place or drop the product into water or 

other liquid.

•  Do not remove the back of the control unit. Refer 

servicing to Joerns.

Warning:

 To reduce the risk of burns, shock, fire, or 

personal injury, adhere to the following instructions. 

Failure to do so could result in personal injury or 

equipment damage.

1.  Use this product only for its intended purpose as 

described in this manual. Only use attachments 

and/or accessories that are recommended by the 

manufacturer.

2.  If this product has a damaged power cord or plug, 

is not working properly, has been dropped or 

damaged, or has been dropped into water, do not 

operate it. For examination and repair, return the 

product to Joerns.

3.  Keep the control unit and power cord away from 

heated surfaces, e.g. space heaters.

4.  Never block the air openings of the product. Do 

not place the control unit on a surface, such as a 

bed or couch, where the air opening and/or filter 

compartment, located on the back of the control 

unit, may be blocked. Keep the air openings free 

of lint and hair.

5.  Never drop or insert any object into any opening or 

hose. 

6.  Do not spill food or liquids onto the control unit. If 

a spill does occur, turn off the unit, disconnect it 

from its power supply and allow at least 24 hours 

for drying.

7.  Do not use the product outdoors, or where 

aerosol-spray products are used.

8.  Plug this product only into a properly grounded 

outlet. Refer to “Grounding Instructions”.

9.  Ensure nothing is placed on the power cord and 

ensure it is not located where it can be stepped on 

or tripped over. 

10. Do not attempt to service the control unit. Please 

call Joerns for any service requests.

11.  The therapy pad (top cover) of this product is not 

air permeable and may present a suffocation risk. 

It is the responsibility of the caregiver to ensure 

that the resident can use this product safely.

Содержание DermaFloat APM















Отзывы: