Connecting the hob to the main power supply
The power supply should be connected in compliance with the relevant standard, or a single-pole circuit breaker.
The method of connection is shown below.
Connecting power cord to the main power supply
1. If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper
tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed
with a minimum gap of 3mm between the contacts.
3. The installer must ensure that the correct electrical connection has been made and that it complies with safety
regulations.
4. The cable must not be bent or compressed.
5. The cable must be checked regularly and only replaced by a properly qualified person.
DISPOSAL: Do not
dispose this product
as unsorted municipal
waste. Collection of
such waste separately
for special treatment is
necessary.
This appliance is labeled in compliance with European directive 2002/96/EC for Waste Electrical and
Electronic Equipment (WEEE). By ensuring that this appliance is disposed of correctly, you will help prevent
any possible damage to the environment and to human health, which might otherwise be caused if it were
disposed of in the
wrong way.
The symbol on the product indicates that it may not be treated as normal household waste. It should be taken
to a collection point for the recycling of electrical and electronic goods.
This appliance requires specialist waste disposal. For further information regarding the treatment, recover and
recycling of this product please contact your local council, your household waste disposal service, or the shop
where you purchased it.
For more detailed information about treatment, recovery and recycling of this product, please contact your
local city office, your household waste disposal service or the shop where you purchased the product.
-52-
