USING YOUR CERAMIC HOB
USING THE TOUCH CONTROLS
•
The controls respond to touch, so you don’t need to apply any pressure.
•
Use the ball of your finger, not its tip.
•
You will hear a beep each time a touch is registered.
•
Make sure the controls are always clean, dry, and that there is no object (e.g. a utensil or a cloth) covering
them. Even a thin film of water may make the controls difficult to operate.
Control Panel
TO START COOKING
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show “ – “ or “ – – “, indicating that the induction hob has
entered the state of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
-42-
1. Cooking zone selecting
2. Timer Function
3. Power or Timer regulating controls
4. Tripal zone selecting
5. Key lock control
6. ON/OFF control