Inspect the area to be cut and remove all debris that could become entangled in
the nylon cutting head. Also remove any objects that the unit may throw during
cutting.
Keep children away. Onlookers should be kept at a safe distance from the work
area, at least 15 meters.
Never leave the machine unattended.
Do not use this unit for any job other than those for which it is intended as
described in this manual.
Do not overreach. Keep proper footing and balance at all times. Do not run the
unit while standing on a ladder or on any other unstable footing location.
Keep hands and feet clear of the nylon cutting head or blade while unit is in use.
Do not use this type of machine for sweeping away debris.
Do not use the unit when you are tired, ill or under the influence of medication,
drugs or alcohol.
Use nylon cutting head which is free of damage. If a stone or any other obstacle
is hit, stop the engine and check the nylon cutting head. A broken or unbalanced
nylon cutting head must never be used.
Do not store in a closed area where fuel vapors can reach an open flame from
hot water heaters, furnaces, etc. Store in a locked, well-ventilated area only.
Ensure safe and proper performance of your product. These parts are available
from your dealer. The use of any other accessories or attachments may cause a
potential hazard or injury to the user, damage to the machine and void this
warranty.
Clean the machine completely, especially, the fuel tank, its surroundings, and
the air cleaner.
When refueling, be sure to stop the engine and confirm that it is cooled down.
Never refuel when the engine is running or hot. When gasoline spills, be sure to
wipe it up completely dispose of those materials before starting the engine.
Stay clear of other workers or bystanders by at least 15 meters.
Whenever approaching an operator of the machine, carefully call his attention
and confirm that the operator stop the engine. Be careful not to startle or distract
the operator which can cause an unsafe situation.
Never touch the nylon cutting head or blade whenever the engine is running. If it
is necessary to replace the protector or cutting attachment, be sure to stop the
engine and confirm that the cutting device has stopped running.
The engine should be turned off when the machine is moved between work
areas.
Be careful not to hit the nylon cutting head against stones, or the ground.
Unreasonable rough operation will shorten the life of the machine as well as
create an unsafe environment for yourself and those around you.
Pay attention to loosening and overheating of parts. If there is any abnormality of
the machine, stop operation immediately and check the machine carefully. If
