Make sure the appropriate blade cover is in place.
When transporting by car, fix the unit firmly using a rope.
Do not transport by bicycle or motorcycle as it is dangerous.
Never transport the brush cutter over rough roads over long distances
without first removing all fuel from the fuel tank, as doing so might cause fuel
to leak from the tank.
7.2.7 Operation safety precautions
Grip the handles of the brush cutter firmly with both hands. If you suspend
the work, place the throttle into the idling position.
Always be sure to maintain a steady, even posture while working,
Maintain the speed of the engine at the level required to
perform cutting work, and never raise the speed of the
engine above the level necessary.
If the grass gets caught in the blade during operation,
or if you need to check the unit or refuel the tank, always
be sure to turn off the engine.
If the blade touches a hard object like a stone, immediately
stop the engine and check if something is wrong with the
blade. If so, replace the blade by new one.
If someone calls out white working, always be sure to turn
off the engine before turning around.
Never touch the spark plug or plug cord while the engine is
in operation. Doing so may result in being subjected to an
electrical shock.
Never touch the muffler, spark plug, or other metallic parts of the engine
white the engine is in operation or immediately after shutting down the
engine. Doing so may result in serious burns.
When you finish cutting in one location and wish to continue work in another
spot, turn off the engine and turn the unit with the blade facing away from
your body.
7.2.8 Maintenance safety precaution
Perform the maintenance and checking operations described in this manual
at regular intervals, if any part must be replaced or any maintenance or repair
work not described in this manual must be performed, please contact the
nearest authorized servicing dealer for assistance.
Under no circumstances should you ever take apart the brush cutter or alter
it in any way. Doing so might result in the brush cutter becoming damaged
during operation or the brush cutter becoming unable to operate properly.
Always be sure to turn off the engine before performing any maintenance or
checking procedures.