IMPORTANT
! All stored fuel should be stabilized with a fuel stabilizer.
3.Remove the spark plug and pour about 3cm° of oil into the cylinder through the
spark plug hole. Slowly pull the recoil starter 2 or 3 times so oil evenly coat the
interior of the engine. Reinstall the spark plug.
4. Before storing the machine, repair or replace any worn or damaged parts.
Make sure the scabbard is in place. Remove the air cleaner element from the
carburetor and clean it thoroughly.
Rinse and dry thoroughly, then add a few drops of oil and work it in. Reassemble.
5. Store the machine in a clean, dust-free area.
9.7.3 Disposal
•
Cutting remnants
: do not throw with household rubbish or into the
environment. Dispose of cutting remnants in rubbish collection centres or seek
advice from your local municipality.
•
Tool:
do not dispose with household garbage. Do not throw into the
environment.
Remove oil and fuel from the machine, and dispose them in specific recycling
centers.
Dispose of the product in a waste collection centre; or seek advice from your
local municipality.
•
Proceed with disposal of remnants, tool, accessories, fuel mixture, oil and
packaging according to local regulations regarding the protection of the
environment.
