9.5.2 Cutting sequence
If a radial cut is necessary, cut a Little at a time in several passes.
9.5.3 Working position
Hold the control handle with your right hand, and the shaft with your left hand.
Your left arm should be extended to the most comfortable position.
NOTE
: Take a rest when you feel fatigue
9.5.4 Cutting techniques
(Fig. HT9 ; HT10; HT11; HT12)
Vertical cut:
Swing the cutting blade up and down in an arc as you move along the hedge: use
both sides of the cutting blade.
Horizontal cut:
Hold the cutting blade at an angle of 0° to 10" as you swing the hedge trimmer
horizontally. Swing the blade in an arc towards the outside of the hedge so that
the cuttings are swept on to the ground.
