7.3.4 Wearing the Strap (Fig. BC7)
1.Hook the strap hook to hanger on the outer pipe.
2.Wear the strap so that the hook stays at your right
hand side.
1. Adjust the length of the strap so that you
can hold and operate machine comfortably.
7.4 OPERATION
Intended use
- The product is intended for domestic use.
- The product is intended for cutting grass and trimming edges
Cutting operation
A. Metal blade usage (Fig.BC8)
Always cut by guiding the head from your right to left.
A metal blade cuts best up to the point 1/3 from the
edge.
Use that area for cutting shrubs, tough and thick
weeds.
For cutting young grass, you can use up to 2/3 from
the tip of blade. Adjust the engine speed according to
the cutting objects.
Cut the young grass at middle speed, and cut shrubs
or tough and thick weeds at high speed.
1.For shrubs and tough/thick weeds,
2.For grass and weeds,
3.Direction of cutting
4.Direction of rotation
IMPORTANT!
Operating at low speed makes it easier
for grass, weeds, or twigs to become caught up in the
blades, and also it makes the shaft and clutch wear
down more quickly.
B. Nylon cutter usage
Nylon cord consumes large power.
Please note that the engine rotation speed in operation should be 50% as large
as when using metal blade
Nylon cutter cuts grass with the power of cord rotation. If you try to cut grass for
the length of cord at one time, rotation speed becomes lower due to resistance
and you cannot cut well.
In case of large resistance, get the nylon cutter away from grass once, make the
rotation speed higher, and cut a small amount of grass at one time.
If you try to cut grass by swinging the brush cutter in the reverse way (from left to
