JLG LIFTLUX 210-25, Руководство по эксплуатации и безопасности

Страница: 41 / 84

SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROL
3121303 – JLG Lift – 3-9
Platform Control Descriptions
When platform/ground control select switch is switched to
platform all movements and operations are controlled via the
platform control panel. The controls are activated through
either push-buttons or toggle switches, whose functions are
marked with symbols and/or written text.
1. Emergency Stop Button - Button, when depressed, will
immediately shut the machine off. Cuts out all functions
except emergency platform lowering.
2. Horn - Button, when depressed, activates the horn.
3. Start Switch - Start the Diesel engine by turning the start
switch on the control panel to the right.
4. Lift/Drive Contoller - The controller works in conjunction
with the platform extension, drive and the lift switch,
depending upon which switch is selected.
5. Overload LED - This LED will illuminate (red) when the
platform becomes overloaded.
6. Steer Switch - Choose the direction of steering by acti-
vating the steer button according to the direction sym-
bols. This switch must be held for the duration of
steering.
7. Drive LED - This LED light remains illuminated when the
machine is in a drivable configuration.
8. Platform Extension/Drive/Lift Select - Switch that selects
the functions of platform extension, drive, or lift.
9. Lift Indicator LED - LED light remains illuminated until
the maximum height is reached.
10. Slow Drive LED - LED light remains illuminated when the
machine is in slow drive speed mode.
11. Lift/Lower Enable - This switch works in conjunction with
the lift/lower function. It must be depressed once after
selecting the lift/lower direction.
12. Tilt (slope) LED - This LED light will remain on until the
machine is driven on a slope greater than 3°. Once the
tilt limit is exceeded the light will go out.