JLG LIFTLUX 210-25, Руководство по эксплуатации и безопасности

Страница: 76 / 84

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-14 – JLG Lift – 3121303
Tire Replacement
JLG recommends a replacement tire be the same size, ply and
brand as originally installed on the machine. lease refer to the
JLG Parts Manual for the part number of the approved tires for a
particular machine and model. If not using a JLG approved
replacement tire, we recommend that replacement tires have
the following characteristics:
• Equal or greater ply/load rating and size of original
• Tire tread contact width equal or greater than original
• Wheel diameter, width, and offset dimensions equal to
the original.
Unless specifically approved by JLG Industries Inc. do not
replace a foam filled tire assembly with a pneumatic tire. When
selecting and installing a replacement tire, ensure that all tires
are inflated to the pressure recommended by JLG. Due to size
variations between tire brands, both tires on the same axle
should be the same.
Wheel Replacement
The rims installed on each product model have been
designed for stability requirements which consist of track
width, tire pressure, and load capacity. Size changes such as
rim width, center piece location, larger or smaller diameter,
etc., without written factory recommendations, may result in
an unsafe condition regarding stability.