JLG LIFTLUX 210-25, Руководство по эксплуатации и безопасности

Страница: 54 / 84

SECTION 4 - MACHINE OPERATION
4-8 – JLG Lift – 3121303
4.9 PARKING AND STOWING
Once the work carried out is completed the machine has to
be fully lowered and the battery isolator switch should be
turned off.
THE MACHINE HAS TO BE LOCKED BY THE KEYSWITCH ON THE
GROUND CONTROL PANEL SWITCH TO AVOID THE USE BY ANY
UNAUTHORIZED PERSONNEL.
In case the machine is not used for a longer period of time,
the batteries should be charged once every two weeks due
to the self discharge and power consumption of the machine
at rest.
4.10 LIMIT SWITCHES & SAFETY DEVICES
1. Limit Switches for Drive Mode - High drive is possible,
when the platform is lowered. When the platform is
raised by 3.5 m (11.5 ft)(210-25) and 3.7 (12.1 ft)(245-
25) or greater, only low drive is possible.
2. Outrigger Interlock - This switch allows the machine to
be driven when all outriggers are completely retracted.
The switch also prevents the mahine from being lifted
until the machine is level.
3. Tilt Switch - If the machine is exceeding a tilt angle of 3°,
the platform cannot be elevated by 1 m (3.2 ft) or greater
or if driving while elevated the drive function will be cut
out.
4. Maximum Height Switch - The Maximum Height Switch
cuts out the lift once the platform reaches 21m (69 ft).
5. Scissor Protection Cage - To avoid jamming of objects in
the scissor device a protective cage is designed, which
by means of struts will automatically be raised, once the
platform elevates.