PAGE 86 of 142
5.10.5. Optical Guide Pivot Mount
An optional mounting point for any optical guide is available.
►
(see “Battery Powered Optical Guide” on page 87)
►
(see “Optical Guide” user manual)
To install the pivot mount, see these following instructions:
1.
Remove the dovetail bar pivot from one of the sets of frame bars
(Fig. 196-1)
.
The choice of which dovetail bar pivot to remove is at the user’s discretion.
2.
Attach the optical guide pivot mount to the frame bars
(Fig. 196-2)
, tighten
the dovetail knobs and the dovetail screws. Ensure a flush alignment of the
pivot mount and the frame bars to achieve proper centering of the optical
guide pivot mount.
3.
Mount an optical guide see the appropriate instructions listed above.
2
1
Fig. 196 - Correct probe holder longitudinal adjustment
