Jinko JK2830, Руководство по эксплуатации

Страница: 53 / 71

JK2830 Operation Manual Chapter 4 System and FILE

Im

DEV A

DEV B

REF A

REF B
◼
Control and set parameters on <BIN DISP> page

BIN COUNT (ON/OFF)
◼
Control and set parameter on <LIMIT SETUP> page

PARAM (swap parameter)

NOM

MODE (%-TOL/ABS-TOL/SEQ-MODE)

AUX (ON/OFF)

COM (ON/OFF)

High and low limits of each bin
4.2.2 U-disk manage performance
As described above, JK2830 has a standard configuration of USB HOST interface,
so the external U-disk can be used as the memory media. In this condition, it
breaks the memory limit of 100 groups of *.EST files. Meanwhile those files can
be copied to IBM PC or compatible desk-top computer, laptop with USB interface
to reach the infinite extension.
JK2830 supports the USB memory devices as below:
◼
Meet the USB 1.0/1.1 standard
◼
Capacity: 32MB/64MB/128MB/256MB
◼
File format: FAT32(Format the USB memory on Microsoft Windows operation
system)
4.2.3 Operation steps for file management
A. Save the following control and setting parameters to a file by the
following steps
1) Select and set all control and setting parameters on the desired page.
2) Press [FILE], the following soft keys will be displayed.
◼
LOAD
◼
SAVE
◼
DELETE
◼
COPY
◼
RENAME
◼
EXIT
3) In the file list, move the cursor to the file-saved position or input the file
number directly.
4) Press SAVE , the following soft keys and “ File name
：
” will be displayed.
◼
ESC
47