manualshive.com logo in svg

Jetter JX3-BN-CAN, Руководство пользователя

Поделиться
Скачать
Jetter JX3-BN-CAN Скачать руководство пользователя страница 9

JX3-BN-CAN 

1 Safety Instructions

 

 

 

 

 

1 Safety 

Instructions 

1.1 

Generally Valid Safety Instructions 

The  device complies with the valid safety regulations and standards. Special emphasis 
was given to the safety of the users. 
 
Further, the user should adhere to the following regulations: 
 

• 

relevant accident prevention regulations; 

• 

accepted safety rules; 

• 

EC guidelines and other country-specific regulations. 

 
 

 

1.1.1  Usage to the Intended Purpose 

Usage to the intended purpose includes operation in accordance with the User Manual. 
 
The JX3-BN-CAN module is for remote connection of JX3 expansion modules to all 
controllers of the JetControl series. Up to 8 expansion modules can directly be connected 
to the JX3-BN-CAN bus head. By means of a JX3-PS1 module, eight further JX3 
modules can be connected. 
The supply voltage of the JX3-BN-CAN module is DC 24 V. This operating voltage is 
classified as SELV (Safety Extra Low Voltage). The JX3-BN-CAN module is therefore not 
subject to the EU Low Voltage Directive. 
 

The JX3-BN-CAN module may only be operated within the limits of the stated data. 
 

The device is used to control machinery, such as conveyors, production machines, and 
handling machines. 
 

 

1.1.2 Non-Intended 

Use 

The device must not be used in technical systems which to a high degree have to be fail-
safe, e.g. ropeways and aeroplanes.
If the device is to be run under ambient conditions which differ from the conditions 
mentioned in chapter 

Operating Conditions

 (on page 42), the manufacturer is to be 

contacted beforehand. 
 

 

 

 
 

    Jetter AG 

9 

Содержание JX3-BN-CAN























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды