Appendix
JetWeb
12
Glossary Peripherial Modules
D
Diagnostic bit
A diagnostic bit describes a status. A status can be, for example, missing supply of the
actuators or reaching a limit.
Diagnostic bits can be read via status register.
E
ENC
Enc
or: "Coding device"
Error bit
An error bit marks a critical error requiring intervention by the user. A critical error might
be cable break or short circuit.
Error bits can be read via status register.
J
JX3 backplane module
The JX3 modules are linked with each other by means of the backplane module (via the
JX3 system bus connector).
The JX3 backplane module is snapped onto the DIN rail.
JX3 module
It consists of a JX3 module enclosure and a JX3 backplane module.
JX3 module enclosure
Contains the specific electronic devices for the respective JX3 module.
JX3 system bus
The JX3 modules are interconnected via the JX3 system bus.
M
Module Registers
Every module has got a diagnostics, administration and configuration to be carried out via
module register.
The entire register number results from the number of the module register, and of a
register prefix. The register prefix is determined by the position of the module in the
system.
50
Jetter AG
Содержание JX3-BN-CAN
Страница 37: ...JX3 BN CAN Appendix Appendix Jetter AG 37...
