Jetter JX3-BN-CAN, Руководство пользователя

Страница: 22 / 54

5.1 Register Array for JX3 Modules
JetWeb
5 Register Addressing
5.1 Register Array for JX3 Modules
Each JX3 module is equipped with over 10,000 module registers. The module registers,
on the other hand, have been assigned to the controller registers. By means of registers,
process, configuration and diagnose data can be read by module JX3-BN-CAN,
respectively written to the module.
Registers can be accessed directly in the application program of the controller, in a setup
window of JetSym, or via the user interface directly.
Register number
3 0 0 z
Module register number
The meaning depends on the module
Register prefix
The meaning depends on the controller
The register number results from a register prefix and a module register number. The
register prefix depends on the position of the JX3-BN-CAN module in the Jetter system
bus, and on the controller that is applied.
At determining the register prefixes, the following parameters have to be considered:
• Controller (JC-24x, JC-64x, JC-800, JM-D203-JC-24x)
•
Submodule position (at JX6-SB, JX6-SB-I)
•
I/O module number in the Jetter system bus
22 Jetter AG