JETSURF ELECTRIC, Руководство пользователя

Страница: 39 / 64

41
8. BEFORE THE RIDE
8.3.3. MAIN FIN FASTENING
• Unscrew 4 (four) screws from the Main fin
base.
4 x screw M6x12
Info
Use the screwdriver provided with the JetSurf Electric.
• Place the main fin on the Main fin base.
Note
Make sure the fin is oriented correctly.
•
Insert the removed screws in the openings on
the main fin and tighten the fin.
Tightening torque 3,5 N.m
Note (Material damage)
Tighten gently. If too tight, the fin can be damaged.
Info
The fin should not allow any movement.
Note (Material damage)
• Do not transport a motorized surf with fins attached. The fins are fragile and are
not designed to bear the weight of a surfboard on a hard surface.
• Keep all the screws openings for attaching fins clean, without sand and other
impurities which might damage the thread.
• We recommend screwing the main fin screws into the base even without the fin.
JE_0812
JE_0813