JETSURF ELECTRIC, Руководство пользователя

Страница: 45 / 64

47
9. RIDING INSTRUCTIONS
9.3. BRIEF DESCRIPTION OF STARTING
Caution
The rider prepared to use the JetSurf Electric must wear a life jacket, safety helmet and
must have the original JetSurf wrist band with the engine shut-off key attached to his/
her wrist and it must be connected with the motorized motorized board by means of
the safety leash.
For sharp start from water it is necessary to find a suitable place where to start riding.
First it is necessary to have a sufficient depth from which we can start safely without
damaging the bottom fins of the motorized surf.
Note
The minimum depth is 50 cm. Keep in mind that after starting the engine, the rear part
of the board may sink by 10-20 cm.
Warning (Risk of Accidents)
• Never start JetSurf Electric in swimming area.
• Make sure that you have sufficient space for manoeuvring, mainly if you are a
beginner. The ideal area is 300x300 m without obstacles and with smooth water
surface.
• Always check water (the dirt and litter in the water) to avoid damage of JetSurf
Electric.
1. STAGE ONE
Inserting the shut-off key into the shut off switcht
for 5 seconds
- - -
Removing the shut-off key from the shut-off switch
1. The ECU waits 5 minutes for
the second key insertion
2. The indicator flashes blue
2. STAGE TWO
Second insertion of the shut-off key into the shut -
-off switch
1. Indicator lights violet - diagnostics
2. Activation of driving mode
3. Indication of battery pack
capacity