Copyright@1993~2013 Advanced Computer & Network Corp. All Rights Reserved.
52
U Series User Manual
。
WinSyslog:
。
Most UNIX systems have built-in syslog daemon.
When it is done, click OK button.
Event Log Filter
The Event Log Filter tab is used to setup event log filter.
The options available in this dialog:
Event log filter: You can choose the alert levels which you would like to have shown on LCM.
The default setting for LCM only includes WARNING and ERROR event logs.
When it is done, click OK button.
Network Setting
The menu Configuration -> System -> Network setting or Network setting tab of the operation
area is for accessing the Management network port and LAN ports. It is used to change IP
addresses of network ports. The various controllers have different network port configurations:
724U / 716U: 1 x GbE Management port + 6 x GbE ports per controller.
724U 10G / 716U 10G: 1 x GbE Management port + 2 x 10GbE ports + 2 x GbE ports per
controller.
Each port must be assigned its own IP address. They need to be configured in multi-homed mode,
or a present link aggregation / trunking mode. When multiple LAN ports are set up in link
aggregation or trunking mode, all the LAN ports share the same IP address. The following example
shows the 724U / 716U series (1 x GbE Management port + 6 x GbE ports).