Copyright@1993~2013 Advanced Computer & Network Corp. All Rights Reserved.
49
U Series User Manual
System name: To change the System name, highlight the old name and type in a new one.
System indication: Enable it to turn on the system LED for locating this system in the racks.
Buzzer: Enable it to let the system make a sound like a bee buzzing when the system is
abnormal.
Auto shutdown: Enable it to let the system shutdown automatically when the voltage or
temperature is out of the normal range. For better data protection, it is recommended to
check Auto Shutdown.
When it is done, click OK button.
Date and Time
The Date and Time icon is used to setup the system time and NTP (Network Time Protocol) server
setting.
The options available in these dialogs:
Date and time: To change the current date, time and time zone settings.
NTP server: Enter the IP address to synchronize the time from an NTP server.
When it is done, click OK button.
Mail Setting
The Mail setting icon is used to enter up to three mail addresses for receiving the event
notifications. Fill in the necessary fields and click Send test mail to test whether it is workable.
Some mail servers check the Mail-from address and need the SMTP relay setting for
authentication.
TIP: Please make sure the DNS server IP is well-setup in Network setting -> DNS
setting. So the event notification mails can be sent successfully.