Jet JTS-254, Инструкция по эксплуатации

Страница: 7 / 42

32
E Operation: To use sliding table
5. Loosen Knob A and you may move the miter gauge from left rail
to right rail
D Bedienung: Verwendung des Schiebetischs
5. Lösen Sie Griff A, damit Sie das Gehrungsmaß von der linken
zur rechten Schiene bewegen können.
F Fonctionnement : Utilisation du plateau de glisse
5. Desserrez la molette A ; vous pouvez alors déplacer le guide de
coupe angulaire du rail gauche au rail droit
5
scale.
Move the fence back and turn the framing 180 degree to
check the other side.
If the two dimensions are not the same, loosen the four
screws and align it.
Retighten the two screws.
Adjust the clamp screw to ensure fence can be locked
tightly on the saw.
TO CHANGE THE CARBON BRUSHES (FIG.B)
NOISE
Noise levels can vary widely from machine depending
on conditions of use.
Persons exposed to high noise levels, even for a short
time, may experience temporary partial hearing loss and
continuous exposure to high levels can result in
permanent hearing damage. Additionally, suitable ear
protectors must be provided, maintained and worn.
Please read the instructions carefully
before starting the machine.
Always disconnect the plug from the socket
before carrying out any work on the
machine.
Wear ear protectors!
Always wear goggles when using the
machine.
Always keep hands away from the path of
the saw blade.
Never expose tool to rain.
Danger
Do not dispose of electric tools together
with household waste material! In
observance of European
Directive 2002/96/EC on waste electrical
and electronic equipment and its
implementation in accordance with national
law, electric tools that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
Accessory - Not included in standard
equipment, available as an accessory.